˙Max. Flow:300-750 L/min.
˙Temp. Scale Range:40℃-120℃
˙Max. Oper. Press.: 345bar
˙In-line Hyd. testers
˙Accurately measure oil flow, pressure and temperature on in-plant equipment, forklifts, machine tools and more
˙Temperature and flow readings are in Imperial and Metric and accurate to within ±2% of full scale
˙Dual pressure gauges for high and low pressure readings. Low pressure gauge is automatically shut-off and protected as pressure rises beyond its maximum reading
˙Automatic pressure compensating feature lets you increase flow without affecting pressure setting
˙Reverse flow through tester will not cause damage. A replaceable safety disc ruptures if pressure exceeds upper limit
˙Solid state voltage regulator eliminates errors caused by voltage change during testing
˙Power Team

˙Max Spread:127-229mm
˙Max Reach:54-149mm
˙Handles internal pulling jobs
˙BEARING & PULLEY
˙Power Team

˙Cap.：91 ton
˙Stroke: 394mm
˙Quickly remove or install tapered roller bearings
˙With both sling and jack models available and two pumps to choose from
˙One-Person operation
˙Each unit complete with a heavy-duty 91-ton Hyd. Cyl., 700bar pump with remote control solenoid valve, hydraulic pressure gauge (11543), a pulling shoe and installing tube
˙Power Team

˙Cap.：50 & 91 ton
˙Max Spread:1149-1219mm
˙Max Reach:381-1067mm
˙Puller can be assembled in 2 or 3-jaw configurations
˙Hydraulically-actuated jaws allows cylinder to move in or out with a safe, secure grip on workpiece
˙Hydraulic lift system for easy, precise position of puller
˙Unique dual pump arrangement. LP pump positions, holds and opens jaws. The HP pump advances and retracts the pushing Cyl. without releasing clamped jaws
˙Swivel casters give ease of mobility
˙Large wheels make movement of cart easy
˙Super Lock-Jaw™ feature means the harder the pull, the tighter the puller jaws grip. No chains or cages required to keep puller jaws from slipping or springing off the part being pulled
˙Guards at pinch points protect operator
˙Puller can be mounted on cart 90 degrees to right or left of puller cart centerline, permitting use in tight quarters
˙Self-centering design puller jaws will automatically grip work evenly
˙Choice of cylinder with a 169 mm or 337 mm stroke
˙Adjustable jaws mean they always pull on a flat surface. Retaining chain holds jaws in place during positioning
˙91 ton hydraulic cylinder is single-acting, spring return type with a maximum working pressure of 700 bar
˙Lifting bracket allows puller to be lifted if the workpiece center is more than 914 mm off the floor
˙Adjusting screw allows operator to move vertical position of the puller
˙Spring loaded feature means Enforcer 100 will align itself on uneven pulls
˙Power Team

˙Cap.：7 ton
˙Max Spread: 270mm
˙Max Reach:385mm
˙Ideal for installing a wide variety of press-fit parts
˙Portable pushing kits include an external Lock-Jaw™ puller, an internal puller, Hyd. Cyl., and a tri-section pulling attachment, all in one compact, lightweight unit complete with carrying case
˙Power Team

˙Cap.：16, 27 & 45 ton
˙Max Spread:298-512mm
˙Can apply a pushing or pulling force, depending on how the puller is set up
˙Each unit includes perfectly matched Hyd. components that can be detached from the Bi-Directional™ Puller
˙Optional leg kits adapt your Bi-Directional™ Puller to extra long or extra short reach
˙A wide variety of threaded adapters, bearing pulling attachments and internal pulling attachments can be used in combination with our Bi-Directional™ Pullers
˙Power Team

˙Cap.：9, 16, 27 & 45 ton
˙Spread:508-1118mm
˙Reach:292-702mm
˙9 ton sets include: single-acting, spring return hydraulic cylinder, hose, coupler dust cap, single-speed hydraulic hand pump, and puller
˙27 and 45 tons sets include: Power-Twin® single-acting, spring return hydraulic cylinder, hose, coupler, dust cap, single-speed hydraulic hand pump, puller, adjusting screw and crank
˙Power Team

˙PH83C LOCK-JAW™ PULLER ACCESSORY KITS
˙CONVERTS PH113C INTO A HYDRAULIC STRAIGHTENING TOOL
˙LONG JAW SET FOR PH83C AND PH113C
˙Power Team

˙Cyl. Cap.:6, 8, 11 & 30ton
˙Spread: 200-540mm
˙Reach: 80-110mm
˙Spring loaded live centering cone
˙Bladder type oil reservoir
˙Use with 2 or 3-jaws
˙PH82K is a complete pulling system which includes a hydraulic power module, 2-way puller head, jaws, legs and bearing splitter attachment, all contained in a convenient carrying case
˙Power Team