˙KG. Range: 1000-2000kg
˙Press Bed Height: 2718-3099mm
˙Adjustable legs spread to clear obstacless (telescoping boom for extra reach)
˙Boom collapses completely and legs fold for compact space-saving fold-away storage
˙2-speed hydraulic hand pump provides fast boom travel and precise operator controlled descent
˙Roller bearing wheels and a steering dolly provide ease of mobility. Lifting chain is included
˙Power Team

˙Tonnage:73-181 ton
˙Press Bed Height: 229-1626mm
˙Press Bed Width: 352-949mm
˙The original, patented Roll-Bed® extends out for easy loading and unloading with a crane or other lifting device, supporting loads up to 1361 kg
˙Movable work-head glides easily side-to-side for full offcenter load capacity across width of upper frame
˙“Daylight” is 1283 x 1524 mm for 73 and 91 ton models; 1302 x 1625 mm on 136 and 181 ton presses
˙Fast approach of double-acting, 334 mm stroke cylinder is provided by PQ1204S “Quiet” electric/hydraulic pump with remote control hand switch
˙Adjustable lower bed width for secure balancing and centering of heavy jobs
˙Lifting mechanism has a turn crank handle to raise or lower upper bolster (a heavy-duty 1/2" drill motor can replace handle for automatic adjustment)
˙Four locking pins hold bolster in place for pressing
˙Power Team

˙Tonnage:136-181 ton
˙Press Bed Height: 228-1111mm
˙Press Bed Width: 279-991mm
˙Standing 2,3 m tall, these giants handle the really big jobs
˙Work-head has wide horizontal travel
˙Rugged press frame withstands load of rated capacity across full width of frame
˙Winch mechanism provides easy positioning of press bed, locks in place for insertion of retaining pins
˙Uprights are placed for easy side entry of bars or shafts for straightening or bending
˙Fast cylinder approach is provided by PQ1204S"Quiet"electric/hydraulic pump
˙Remote control hand switch, enables operator to view work from all sides with fingertip control of cylinder piston travel
˙Power Team

˙Tonnage:91 ton
˙Press Bed Height: 51-1067mm
˙Press Bed Width: 178-1092mm
˙Cylinder work-head glides across upper frame on rollers, locks in place for off-center pressing jobs
˙Press bed is raised and lowered by winch which locks in place for insertion of bed retaining pins
˙Generous “daylight” of 1067 x 1270 mm accommodates bulky work pieces, uprights are placed for easy side entry of bars or shafts for straightening or bending
˙Choice of single or double-acting cylinder. Hydraulic pump options include: 2-speed hand pump with large 7,6 L reservoir, PE172 electric/hydraulic pump or “PQ” series “Quiet” electric/hydraulic pump with low noise level
˙Power Team

˙Tonnage:50 ton
˙Press Bed Height: 152-1067mm
˙Press Bed Width: 83-832mm
˙Full off-center pressing at full rated capacity across width of upper frame without buckling or bending
˙Maximum “daylight” is 1067 x 914 mm, making positioning of even bulky work pieces easy
˙Height of press bed is easily adjusted with winch.
˙Friction brake prevents bed from dropping and handle from spinning upon release
˙Presses with single-acting cylinders offer choice of 2-speed hand operated, electric/hydraulic, or air/hydraulic pump
˙Models with double-acting cylinders have an electric/hydraulic pump
˙Press models equipped with remote control enable operator to view work from all sides with fingertip control of cylinder piston travel
˙Power Team

˙Tonnage:23 ton
˙Press Bed Height: 175-1102mm
˙Press Bed Width: 76-737mm
˙Design permits use as both H-Frame and C-Frame press. Cylinder can be mounted on frame extension to handle jobs which won't fit between uprights
˙Open-end-Access™ press models are also available with remote control to enable the operator to view work from all sides with fingertip control of cylinder piston travel
˙Off-center pressing loads of full capacity can be applied across entire width of frame
˙Press bed height easily adjustable with winch. Bed will not drop when handle is released
˙Choice of power sources:two-speed hydraulic hand pump, electric/hydraulic or air/hydraulic
˙Power Team

˙Tonnage:23 ton
˙Press Bed Height: 175-1102mm
˙Press Bed Width: 76-737mm
˙Rugged, yet reasonably priced. Handles many"big press"tasks
˙Press bed height easily adjustable with winch. Bed will not drop when handle is released
˙Choice of power sources: two-speed hydraulic hand pump, electric/hydraulic or air/hydraulic. (Note: Stroke length limited to 159 mm on economy models)
˙Power Team

˙Tonnage:9 ton
˙Bench Press Work Area: 391x457mm
˙Floor Press Work Area: height 127-1041mm; horizontal daylight 553mm
˙Ideal for small pressing jobs, repairing small motor armatures, removing and installing gears, bearings, other press-fit parts
˙Bench press has 391 x 457 mm work area. Floor press bed height is adjustable from 127 to 1041 mm with horizontal “daylight” of 553 mm
˙Choices of power sources include: single-speed hand pump, electric/hydraulic or air/hydraulic
˙Hydraulic gauges, hoses and fittings included
˙Power Team

˙Tonnage:23 ton
˙Cyl. Retracted Daylight: 260-514mm
˙Press Bed Width:216mm
˙Open-End-Access™ design makes loading and unloading of work easy
˙Bench mount requires less than 1,4 sq. mm. of space
˙Cylinder head adjusts to three convenient working positions, providing up to 51 cm of “daylight”
˙Can be bench-mounted or mounted on optional base
˙Hydraulic cylinder delivers a 15 cm stroke and is driven by a P59 two-speed hand pump
˙Power Team