˙Max Spread:127-229mm
˙Max Reach:54-149mm
˙Handles internal pulling jobs
˙BEARING & PULLEY
˙Power Team

˙Cap.：91 ton
˙Stroke: 394mm
˙Quickly remove or install tapered roller bearings
˙With both sling and jack models available and two pumps to choose from
˙One-Person operation
˙Each unit complete with a heavy-duty 91-ton Hyd. Cyl., 700bar pump with remote control solenoid valve, hydraulic pressure gauge (11543), a pulling shoe and installing tube
˙Power Team

˙Cap.：50 & 91 ton
˙Max Spread:1149-1219mm
˙Max Reach:381-1067mm
˙Puller can be assembled in 2 or 3-jaw configurations
˙Hydraulically-actuated jaws allows cylinder to move in or out with a safe, secure grip on workpiece
˙Hydraulic lift system for easy, precise position of puller
˙Unique dual pump arrangement. LP pump positions, holds and opens jaws. The HP pump advances and retracts the pushing Cyl. without releasing clamped jaws
˙Swivel casters give ease of mobility
˙Large wheels make movement of cart easy
˙Super Lock-Jaw™ feature means the harder the pull, the tighter the puller jaws grip. No chains or cages required to keep puller jaws from slipping or springing off the part being pulled
˙Guards at pinch points protect operator
˙Puller can be mounted on cart 90 degrees to right or left of puller cart centerline, permitting use in tight quarters
˙Self-centering design puller jaws will automatically grip work evenly
˙Choice of cylinder with a 169 mm or 337 mm stroke
˙Adjustable jaws mean they always pull on a flat surface. Retaining chain holds jaws in place during positioning
˙91 ton hydraulic cylinder is single-acting, spring return type with a maximum working pressure of 700 bar
˙Lifting bracket allows puller to be lifted if the workpiece center is more than 914 mm off the floor
˙Adjusting screw allows operator to move vertical position of the puller
˙Spring loaded feature means Enforcer 100 will align itself on uneven pulls
˙Power Team

˙Cap.：7 ton
˙Max Spread: 270mm
˙Max Reach:385mm
˙Ideal for installing a wide variety of press-fit parts
˙Portable pushing kits include an external Lock-Jaw™ puller, an internal puller, Hyd. Cyl., and a tri-section pulling attachment, all in one compact, lightweight unit complete with carrying case
˙Power Team

˙Cap.：16, 27 & 45 ton
˙Max Spread:298-512mm
˙Can apply a pushing or pulling force, depending on how the puller is set up
˙Each unit includes perfectly matched Hyd. components that can be detached from the Bi-Directional™ Puller
˙Optional leg kits adapt your Bi-Directional™ Puller to extra long or extra short reach
˙A wide variety of threaded adapters, bearing pulling attachments and internal pulling attachments can be used in combination with our Bi-Directional™ Pullers
˙Power Team

˙Cap.：9, 16, 27 & 45 ton
˙Spread:508-1118mm
˙Reach:292-702mm
˙9 ton sets include: single-acting, spring return hydraulic cylinder, hose, coupler dust cap, single-speed hydraulic hand pump, and puller
˙27 and 45 tons sets include: Power-Twin® single-acting, spring return hydraulic cylinder, hose, coupler, dust cap, single-speed hydraulic hand pump, puller, adjusting screw and crank
˙Power Team

˙PH83C LOCK-JAW™ PULLER ACCESSORY KITS
˙CONVERTS PH113C INTO A HYDRAULIC STRAIGHTENING TOOL
˙LONG JAW SET FOR PH83C AND PH113C
˙Power Team

˙Cyl. Cap.:6, 8, 11 & 30ton
˙Spread: 200-540mm
˙Reach: 80-110mm
˙Spring loaded live centering cone
˙Bladder type oil reservoir
˙Use with 2 or 3-jaws
˙PH82K is a complete pulling system which includes a hydraulic power module, 2-way puller head, jaws, legs and bearing splitter attachment, all contained in a convenient carrying case
˙Power Team

˙Spread: 38-762mm
˙Reach: 178-508mm
˙External pulling up to 20"(508 mm) reach and 30"(762 mm) spread for large pulling requirements
˙Internal pulling up to 7"(178 mm) reach and 21"(533 mm) spread for an effective range of internal pulling capabilities
˙Safety cage houses either the internal or external jaws by simply removing the ball lock pins that allows you to change from internal to external in seconds
˙Power Team

˙Cap.: 12ton
˙Spread: 19-305mm
˙Reach: 203mm
˙108 or 208 puller assembly with standard length jaws with a reach up to 8"(203 mm) and a 12"(305mm) spread
˙Self-contained pump/cylinder w/ swiveling adjustable-length pump handle for ease of use at any angle
˙Multiple extension rod parts that includes a 1.9"(48 mm) and two 2.9" (74 mm) extension rods with centering tips for versatility with any project
˙T-handle facilitates the opening, closing, locking, and aligning of the jaws for easy operation
˙Safety cage guides jaws for quick setup, providing a"vise-like" grip reducing slippage
˙Power Team

˙Cap.：91-181 ton
˙Max Spread:1778mm
˙Max Reach:1219-1270mm
˙91-ton capacity puller with 50” (1270 mm) reach and 70” (1778 mm) spread for extra-large pulling requirements
˙Hydraulic-actuated lift cart extends vertically up to 5"(1.52 m) to align easily with project
10,000 PSI (690 Bar) single-acting 10.25” (260 mm) stroke cylinder with spring return for ease of compression and retraction. (Optional double-acting cylinder available)
˙Power Team

˙Cap.: 5-50ton
˙Spread: 203.2-635.0mm
˙Reach: 152.4-356.0mm
˙5 to 50-ton capacity puller with up to 14"(356 mm) reach and 25"(635 mm) spread for large pulling requirements
˙Slim tapered heat-treated tips allow for better gripping and easier access in tight spots
˙10,000 PSI (690 Bar) SA cylinder that allows for high tonnage repeatable execution
˙Lightweight, two-speed manually operated 10,000 PSI(690 Bar) hydraulic pump provides high oil volume for fast cylinder piston approach
˙PE17 Series lightweight, 10,000 PSI (690 Bar)heavy-duty electric pump for reliable performance
˙Remote jog switch with a 10"(3 m) cords allows for additional worker safety
˙Flexible mounting platform allows puller to swivel 360 degrees for easy accessibility to any project
˙Power Team

˙Cap.：9, 16& 27 ton
˙MAx Spread：184-413mm
˙Max Reach：210-282mm
˙Can apply a pushing or pulling force, depending on how the puller is set up
˙Optional leg kits adapt your Bi-Directional™ Puller to extra long or extra short reach
˙Power Team

˙Cap.: 1-25ton
˙Max Spread：82.6-508.0mm
˙Max Reach：54.0-565.2mm
˙Lock-Jaw™ feature on all pullers. The harder the pull, the tighter the grip for removing gears, bearings and countless other press fitted parts
˙2-way, 3-way and 2/3-way combination pullers make it easy to select a specific puller for your application
˙Forged from high quality steel, heat treated and subjected to rigorous tests which exceed rated puller capacity
˙Forcing screw threads are rolled, not cut, creating a smoother and stronger thread
˙Heat treated alloy steel cross bolts for maximum shear strength
˙Machined puller jaw toes produce larger and stronger pulling toes
˙Power Team

˙Simplify the removal of many industrial and automotive fans and blower wheels
˙Fan Removal Adaptor Kit for Wind Turbines
˙Power Team

˙1 to 2 Ton Puller Set
˙4-in-1 Puller Set
˙Slide Hammer Puller Set
˙Power Team